Crestron Electronics CP4N - RMC4 Specifications; Product Specifications

72 • 4-Series™ Control Systems Product Manual — Doc. 8559B
RMC4 Specifications
Product specifications for the RMC4 are provided below.
Product Specifications
Control Engine
Crestron 4-Series™ control processor; real-time, preemptive multithreaded/multitasking kernel;
Transaction-Safe Extended FAT file system; supports up to 10 simultaneously-running programs (license
required
1
), native .AVFramework™ software program
Communications
Ethernet 100 Mbps, autoswitching, autonegotiating, autodiscovery, full/half duplex,
industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH
File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE802.1X, SNMP,
BACnet and IP
3
, IPv4 or IPv6, Active Directory® service authentication, HTTPS
web server, HTTPS web browser setup and XiOCloud® client, SMTP email client
Cresnet® Network Cresnet master mode
USB Supports computer console and USB mass storage class devices via the front
panel USB OTG (On-the-Go) device port
RS-232/422/485 For 2-way device control and monitoring, COM port supports RS-232 up to
115.2k baud with software handshaking, one port also supports RS-422 or
RS-485 and hardware handshaking
IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232
(0–5V) up to 115.2k baud
Memory
SDRAM 1GB
Flash 8GB
External Storage Supports USB mass storage devices up to 1TB
Connectors
USB-OTG (1) USB Type Micro-AB female;
USB OTG port for computer console and USB mass storage devices
LAN PoE (1) 8-pin RJ-45 connector, female;
100BASE-T Ethernet port;
PoE (Power over Ethernet) PD (Powered Device) port
NET (1) 3-pin 3.5mm detachable terminal block;
Cresnet master port;
Provides data only (no power)
2