Crestron Electronics CP4N - RMC4 Specifications

66 • 4-Series™ Control Systems Product Manual — Doc. 8559B
PRO4 Specifications
Product specifications for the PRO4 are provided below.
Product Specifications
Control Engine
Crestron 4-Series™ control processor; real-time, preemptive multithreaded/multitasking kernel;
Transaction-Safe Extended FAT file system; supports up to 10 simultaneously-running programs, native
.AVFramework™ software program
Communications
Ethernet 100/1000 Mbps, autoswitching, autonegotiating, autodiscovery, full/half
duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH,
SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption,
IEEE802.1X, SNMP, BACnet and IP
2
, IPv4 or IPv6, Active Directory® service
authentication, HTTPS web server, HTTPS web browser setup and XiOCloud®
client, SMTP email client
Control Subnet 100/1000 Mbps Ethernet, autoswitching, autonegotiating, autodiscovery,
full/half duplex, DHCP server, DNSserver, port forwarding, isolation mode,
IEEE 802.3at Type 1 compliant PoE PSE
Cresnet® Network Cresnet master mode
USB Supports USB mass storage class devices via the rear panel USB 2.0 host port,
supports computer console via the front panel USB 2.0 device port
RS-232/422/485 For 2-way device control and monitoring, COM port supports RS-232 up to
115.2k baud with software handshaking, one port also supports RS-422 or
RS-485 and hardware handshaking
IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232
(0–5V) up to 115.2k baud
Memory
SDRAM 2GB
Flash 8GB
Memory Card Supports SD and SDHC cards up to 32GB
External Storage Supports USB mass storage devices up to 1TB
Connectors and Card Slots
S1–S3 (3) control card expansion slots
COM 1–2 (2) 5-pin 3.5mm detachable terminal blocks;
Bidirectional RS-232/422/485 port;
Up to 115.2k baud; hardware and software handshaking support