Product Manual — Doc. 8559B 4-Series™ Control Systems • 183
Remote system logging can also be configured in Crestron Toolbox using the Syslog function. For
more information, refer to the Crestron Toolbox help file.
Audit Logging
Audit logging can be turned on to track logons, logoffs, account management changes, and
console commands.
NOTE: Logons, logoffs, and authentication management is always logged by the control
system regardless of audit log settings.
Configure Audit Logging
To configure audit logging on the control system, issue the auditlogging command. Audit
logging is turned off by default.
l
Syntax: auditlogging [on|off] {[all]|[none]|{admin] [prog] [oper] [user]}
[remotesyslog]}
o
on - Turns on audit logging
o
off - Turns off audit logging
o
No parameter: Displays the current audit logging setting
The following access level parameters are optional and are used to log commands
by access level:
n
admin - Logs administrator-level commands
n
prog - Logs programmer-level commands
n
oper - Logs operator-level commands
n
user - Logs user-level commands
n
all - Logs all commands
n
none - Logs no commands
o
remotesyslog - Writes to the remote syslog server only
l
Example: auditlogging on admin oper
Example log output: [2021-11-30T07:02:44-08:00]: EVENT: COMMAND(SHELL
172.30.255.255) USER: admin # AUDITLogging on all
To Next Page
Loading...
