Crestron Electronics CP4N - CP4 Specifications; Product Specifications

Product Manual — Doc. 8559B 4-Series™ Control Systems • 43
CP4 Specifications
Product specifications for the CP4 are provided below.
Product Specifications
Control Engine
Crestron 4-Series™ control processor; real-time, preemptive multithreaded/multitasking kernel;
Transaction-Safe Extended FAT file system; supports up to 10 simultaneously-running programs, native
.AVFramework™ software program
Communications
Ethernet 100/1000 Mbps, autoswitching, autonegotiating, autodiscovery, full/half
duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH,
SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption,
IEEE802.1X, SNMP, BACnet and IP
1
, IPv4 or IPv6, Active Directory® service
authentication, HTTPS web server, HTTPS web browser setup and XiOCloud®
client, SMTP email client
Cresnet® Network Cresnet master mode
USB Supports USB mass storage class devices via the rear panel USB 2.0 host port,
supports computer console via the front panel USB 2.0 device port
RS-232/422/485 For 2-way device control and monitoring, COM port supports RS-232 up to
115.2k baud with software handshaking, one port also supports RS-422 or
RS-485 and hardware handshaking
IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232
(0–5V) up to 115.2k baud
Memory
SDRAM 2GB
Flash 8GB
Memory Card Supports SD and SDHC cards up to 32GB
External Storage Supports USB mass storage devices up to 1TB
Connectors and Card Slots
RELAYOUTPUT
1–8
(2) 8-pin 3.5mm detachable terminal blocks;
Comprises (8) normally open, isolated relays;
Rated 1A, 30VAC/VDC;
MOV arc suppression across contacts