Crestron Electronics CP4N - MC4 Specifications; Product Specifications

56 • 4-Series™ Control Systems Product Manual — Doc. 8559B
MC4 Specifications
Product specifications for the MC4 are provided below.
Product Specifications
Control Engine
Crestron 4-Series™ control processor; real-time, preemptive multithreaded/multitasking kernel;
Transaction-Safe Extended FAT file system; supports up to 10 simultaneously-running programs (license
required
1
), native .AVFramework™ software program
Wired Communications
Ethernet 100/1000 Mbps, autoswitching, autonegotiating, autodiscovery, full/half
duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH,
SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption,
IEEE802.1X, SNMP, BACnet and IP
3
, IPv4 or IPv6, Active Directory® service
authentication, HTTPS web server, HTTPS web browser setup and XiOCloud®
client, SMTP email client
Cresnet® Network Cresnet master mode
USB Supports USB mass storage class devices via the rear panel USB 2.0 host port
RS-232 For 2-way device control and monitoring, COM port supports RS-232 up to
115.2k baud with software handshaking
IR Supports - way device control via infrared up to 1.2 MHz
Wireless Communications
RFTransceiver infiNET EX® network 2-way RF, 2.4GHz ISM Channels 11-26 (2400 to
2483.5MHz), default channel 15; IEEE 802.15.4 compliant
Range 50ft (15m) to nearest mesh network device(s), subject to site-specific
conditions and individual device capabilities, range between floors or ceilings is
limited to one level
2
Range 15m (50ft) to nearest mesh network device(s), subject to site-specific
conditions and individual device capabilities, range between floors or ceilings is
limited to one level
2
Memory
SDRAM 1GB
Flash 8GB
Memory Card Supports microSDcards up to 32GB
External Storage Supports USB mass storage devices up to 1TB
Connectors and Card Slots