Product Manual — Doc. 8559B 4-Series™ Control Systems • 153
5. Enter the following search parameters for the device (required only if multiple USB
connections are active):
l
Model: Enter the model name of the Crestron device (for example, PRO4). The
model is not user-defined. It is the actual model name of the device as displayed in
the EasyConfig tool.
l
Hostname: Enter the device host name.
l
Serial: Enter the serial number (not the model number or TSID) of the Crestron
device. The serial number is a 12-digit number (not beginning with 60 or 65) that
may contain letters. The serial number is printed on a sticker affixed to the device
and is displayed in the EasyConfig tool.
6. Enter the following advanced authentication parameters for the device:
l
Username: Enter the username required to authenticate device communications.
l
Password: Enter the password required to authenticate device communications.
7. Select OK.
The device status reports as "Connected" at the bottom of the selected tool if communications
have been established.
Text Console - Connection Status
The USB connection information for the control system may be saved using the Address Book
function in Crestron Toolbox. For more information, refer to the Crestron Toolbox help file.
To Next Page
Loading...
