Crestron Electronics CP4N - Page 173

Product Manual — Doc. 8559B 4-Series™ Control Systems • 167
Add IP Address to Blocked List
To add an IP address to the blocked list manually, issue the addblockedip command.
l
Syntax: addblockedip [ipaddress]
o
ipaddress - Enter the IP address that will be blocked.
o
No parameter - Lists all blocked IP addresses
l
Example: addblockedip 255.255.255.255
Remove IP Address from Blocked List
To remove an IP address from the blocked list manually, issue the remblockedip command.
l
Syntax: remblockedip [ipaddress]
o
ipaddress - Enter the IP address that will be removed from the blocked list.
o
No parameter - Lists all blocked IP addresses
l
Example: remblockedip 255.255.255.255