176 • 4-Series™ Control Systems Product Manual — Doc. 8559B
6.
Issue the move \user\rootCA_cert.cer \sys, move \user\srv_cert.cer \sys, and
move \user\srv_key.pem \sys commands to move the new certificate files to the
internal \sys directory.
Turn on TLS with the CA-Signed Certificate
To turn on TLS with the CA-signed certificate:
1.
Issue the ssl ca -p: <privatekeypassword> command in the control system console.
NOTE:The password is required if the private key in srv_key.pem is encrypted. If a
password is needed but not provided with the ssl command, the control system will
prompt for the password.
2.
Issue the reboot command to restart the control system.
To Next Page
Loading...
