178 • 4-Series™ Control Systems Product Manual — Doc. 8559B
6. If the validate server option is enabled, select the certificates that will be used for server
validation:
a.
Issue the 8021xtrustedcas list command to list all trusted certificates stored on
the control system.
b.
Issue the 8021xtrustedcas use {certificate_name} command to enable a
certificate for validation. Multiple certificates may be enabled.
NOTE: If the network does not use any of the listed certificates, the network
administrator will provide a certificate that must be uploaded to the control system
manually using the certificate add [certificate_store] {certificate_name}
command. If the certificate is self-signed, enter root for certificate_store. If the
certificate is not self-signed, enter intermediate for certificate_store.
7.
If required, issue the 8021xdomain [domain_name] command to set the domain name of
the network.
8.
Issue the reboot command to restart the control system with the new 802.1X settings.
802.1X configuration can also be performed using the 802.1X function in Crestron Toolbox. For
more information, refer to the Crestron Toolbox help file.
To Next Page
Loading...
