Crestron Electronics CP4N - Page 19

Product Manual — Doc. 8559B 4-Series™ Control Systems • 13
BACnet Support
Native support for the BACnet communication protocol provides a direct interface to third-party
building management systems over Ethernet, simplifying integration with HVAC, security, and
other systems. Using BACnet, each system runs independently but communicates together on
one platform.
1
AppleHomeKit Integration
The CP4N supports integration with an Apple® HomeKit® technology system. Once the CP4N is
paired with a HomeKit system via SIMPLprogramming, a Crestron TSR-310 can be used to
control supported Apple devices. Apairing QRcode is affixed to the CP4N that makes it easy to
pair the control system directly to the Apple Home app.
2
Notes:
1. A BACnet and IP license is required. A free license is available to support up to 50 BACnet objects on a single
4-Series control system. Support for more than 50 BACnet objects requires the purchase of one
SW-3SERIES-BACNET-50+ license. The CP4N supports a maximum of 1000 BACnet objects when dedicated for
BACnet use only. Actual capabilities are contingent upon the overall program size and complexity. To obtain the
license, visit www.crestron.com/bacnetlicense.
2. This feature is only available when using the TSR-310. Other Crestron touch screens, handheld remotes, and
keypads are not supported. For these interfaces, traditional IR or CEC control must be used to control supported
Apple devices.