Product Manual — Doc. 8559B 4-Series™ Control Systems • 35
PoENetwork Powered
Using PoE technology, the RMC4 gets its operating power directly through the LAN wiring,
eliminating the need for a local power supply or dedicated power wiring. A PoE injector
(PWE-4803RU) connects in line with the LAN cable at a convenient location. Crestron PoE
switches (CEN-SW-POE-5 or CEN-SWPOE-16) may also be used to provide a total networking
solution with built-in PoE.
Integrator Friendly Enclosure
The RMC4 features the Crestron IFE (Integrator Friendly Enclosure) form factor, a compact
design that fits almost anywhere and supports a variety of installation options. Its shape allows
multiple RMC4 and other IFE compliant devices to be stacked together. Using the included
mounting bracket, it can be fastened to a flat surface or snapped onto a standard DIN rail. Rack
mount (RMK-IFE-1U)and pole mount (PLMK-IFE-101)kits are also available.
Notes:
1. Modular Programming Architecture (MPA) on the RMC4 requires the purchase of one SW-RMC3-10PROG
license. The license enables support for running up to 10 simultaneous programs on a single RMC4. The license is
not required if only one program is run on the RMC4. To obtain a license for the RMC4, complete the Request for
SW-RMC3-10PROG License form. For questions, contact license@crestron.com.
2. The NET (Cresnet® network) port on the RMC4 is a 3-pin connector which provides connectivity for Cresnet data
only, not power. The Cresnet power conductor does not terminate to the RMC4. An external Cresnet power
supply is required to provide power for Cresnet devices.
3. A BACnet and IP license is required. A free license is available to support up to 50 BACnet objects on a single
4-Series control system. Support for more than 50 BACnet objects requires the purchase of one
SW-3SERIES-BACNET-50+ license. The RMC4 supports a maximum of 500 BACnet objects when dedicated for
BACnet use only. Actual capabilities are contingent upon the overall program size and complexity. To obtain the
license, visit www.crestron.com/bacnetlicense.
4. This feature is only available when using the TSR-310. Other Crestron touch screens, handheld remotes, and
keypads are not supported. For these interfaces, traditional IR or CEC control must be used to control supported
Apple devices.
To Next Page
Loading...
