62 • Crestron Pyng OS 2 for CP4-R Product Manual – DOC. 8432A
Add/Remove Loads Dialog Box
To add or remove a shade group:
1. Select a room from the Select Room Below menu.
2. Tap the check box next to a shade group to add or remove it from the scene. A
filled check box indicates that shade group has been added to the scene.
3. Tap Save to save any changes or Cancel to discard the changes.
Any new shade groups added to the scene may be adjusted in the Shade Loads/Groups
section of the scene configuration dialog box.
Once all changes have been made, tap Save to save any changes to the lighting scene or
tap
Cancel to discard the changes.
To Next Page
Loading...
