CoCo-80 User Manual
38
Figure 40: Channel status window
The instrument can automatically detect the status of IEPE sensor connections. If
the IEPE type of sensor was not connected correctly, the input channel status will
display IEPE.
In the picture above, channel 1, 2, and 3 are enabled with IEPE input mode,
channel 4 is not. Since channel 1 is connected with the IEPE sensors, green letters
“IEPE” are shown. Channel 2 and 3 are not connected to an IEPE sensor therefore
“IEPE” is displayed.
Figure 41. Apply built-in digital integration or double integration.
Input Mode is used to set the type of sensor being connected. The choices are
AC-Differential, AC-Single Ended, DC-Differential, DC-Dingle Ended, and IEPE.
To Next Page
Loading...
