CoCo-80 User Manual
42
When the schedule is activated, the schedule status will be displayed during the
run time.
Figure 46: Display as a schedule of operations is performed
Use the following formula to calculate the total time duration that you can record:
Or
For example if 6 channels are enabled and the sampling rate is 100 Hz with 4GB
memory installed:
Recording Time in Seconds = 4GB/(6*100*8*1.2) = 4*1024*1024*1024/(6*100*8*1.2) =
745654 sec (= 207 hours)
Param -> Display Preferences allows making changes to display preferences.
When the blue focus is on each item, press Enter to choose display preferences
options from the dropdown menu. Finally, press Apply to save the changes and
go back to the previous screen, or press Cancel to go back to the previous screen
without saving any changes.
To Next Page
Loading...
