CoCo-80 User Manual
43
Figure 47: Display Preferences window
Param -> Time Stream Recording Setup defines which time streams will be
recorded to memory when the Rec./Stop button is pressed. To add a stream to
the record list, select it in the Signal List using the Up and Down buttons and
press Enter. Note that adding more signals to the Record List increases the file
size of the recording and reduces the recording duration. Only streams that are of
interest should be recorded to conserve memory and maximize recording time.
Time Stream Recording Setup is dependent on the selected CSA. Note that
only signals that are identified as Record Candidates in the CSA file will be
visible and can be recorded. This feature is designed to simplify the CoCo-80 user
interface and optimize the device computation resources.
Figure 48: Select Time Stream channels for recording
Param -> Spectral Save Setup defines which signals will be recorded to
memory when the Save button is pressed. To add a signal to the record list,
To Next Page
Loading...
