CoCo-80 User Manual
44
select it in the Signal List using the Up and Down buttons and press Enter.
Spectral Save Setup is dependent on the selected CSA. Note that only signals
that are identified as Save Candidates in the CSA file will be visible and can be
saved. This feature is designed to simplify the CoCo-80 user interface and
optimize the device computation resources.
Figure 49: Select Spectral data to be saved
Param -> Limit Alarm Setup defines the actions to be taken when testing
limits are exceeded. This menu item will only be shown when the CSA project
contains limit checking. This menu entry is not available unless specified in a
custom CSA.
Figure 50:Limit test alarm settings
To Next Page
Loading...
