CoCo-80 User Manual
59
Figure 79. Theme Settings: Black or White Style.
F5 (Other) -> Test Note allows entering a note to a test or scanning to enter
the test note.
Figure 80. Test Note Configuration
F5 (Other) -> System Calibration is used to calibrate the CoCo system. The
CoCo loads factory calibration data during start-up, eliminating the need for daily
calibration checks. Although the CoCo does not require daily field calibration, CI
recommends an annual calibration and performance verification by a local CI
service center.
System Calibration software is under Setup/Other/System Calibration
category. CoCo will display steps to perform a system self calibration. Follow the
instruction on the CoCo to proceed.
To Next Page
Loading...
