EasyManua.ls Logo

Cupra Ateca 2020 - Opening and Closing the Sunroof; Opening and Closing the Sunshade Blind

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
regularly cleaned away either by hand or
with a vacuum.
If the sunroof does not work correctly,
the anti-trap function will not work either.
Contact a specialised workshop.
Opening and closing the sunroof
Fig. 89
On the interior roof lining: sunroof button.
The sun blind automatically opens along with
the sunroof if completely closed or if in front
of the sunroof. The sun blind remains in the
previous position and does not automatically
close with the sunroof. The sun blind can on-
ly be closed completely once the sunroof
has been closed.
The
button
Fig. 89 has two levels. The
first level switches the sunroof to the tilted
position, opening or closing it fully or partial-
ly.
On the second level, the sunroof automati-
cally moves to the corresponding final posi-
tion after briefly pressing the button. Activat-
ing the button again stops the automatic
function.
Adjusting the tilt position of the sunroof
Press the rear part of the button
B
to the
first level.
Automatic function: briefly press the rear
part of button
B
to the second level.
Closing the sunroof from a tilted position
Press the front part of the button
A
to the
first level.
Automatic function: briefly press the front
part of the button
A
to the second level.
Stopping the automatic operation by ad-
justing the tilted position of the sunroof or
by closing the sunroof
Press button
A
or
B
again.
Opening the sunroof
Press button
C
backwards to the first level.
Automatic function to the comfort posi-
tion: briefly press button
C
backwards to the
second level.
Closing the sunroof
Press button
D
forwards to the first level.
Automatic function: briefly press button
D
forwards to the second level.
Stopping the automatic operation during
the opening or closing
Press button
C
or
D
again.
Opening and closing the sunshade
blind
Fig. 90
On the interior roof lining: sunshade blind
buttons.
The electrical sun blind works when the igni-
tion is switched on.
When the sunroof is in its most tilted posi-
tion, the sun blind automatically goes into a
ventilation position. The sun blind remains in
this position also with the sunroof closed.
110

Table of Contents

Related product manuals