EasyManua.ls Logo

Cupra Ateca 2020 - Changing Gear in Tiptronic Mode

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving
Note
If the lever is moved accidentally to N
when driving, release the accelerator and
let the engine speed drop to idling before
selecting gear range D or S again.
Should the power supply to the lever be
interrupted in position P, it will not be pos-
sible to move the lever. If this should hap-
pen the manual release can be used
page 208.
Note
If the selector lever lock does not engage,
there is a fault. The transmission is inter-
rupted to prevent the vehicle from acci-
dentally moving. To lock the selector lever
again, press the brake pedal, place the se-
lector lever in the P or N position and then
engage a gear.
Despite a gear being engaged, the vehicle
does not move forwards or back. Proceed
to the next mode:
When the vehicle does not move in the
required direction, the system may not
have the gear range correctly engaged.
Press the brake pedal and engage the
gear range again.
If the vehicle still does not move in the
required direction, there is a system
malfunction. Seek specialist assistance
and have the system checked.
Changing gear in Tiptronic mode
Fig. 143
Centre console: tiptronic transmission
Fig. 144
Steering wheel: automatic transmission
levers
Tiptronic gives the driver the option to
change gears manually.
When you change to the Tiptronic pro-
gramme, the vehicle remains in the currently
selected gear. This is possible as long as the
system is not changing gear automatically
due to a traffic situation.
Using Tiptronic with the selector lever
It is possible to change to Tiptronic mode,
both when the vehicle is stopped and while
driving.
Starting from the D/S position, move the
lever to the right. The instrument panel will
show whether the lever is in manual or Tip-
tronic mode (e.g.
M4
).
Push the lever forwards
+
or backwards
to move up or down a gear
Fig. 143 .
To exit Tiptronic mode, move the lever to
the left.
Using Tiptronic with the steering wheel
paddles
The gearshift paddles can be used when the
selector lever is in the D/S or M (Tiptronic)
positions.
Press the gearshift paddle
+
to select a
higher gear
Fig. 144 .
Press the gearshift paddle
to select a
lower gear.
To exit the Tiptronic mode, pull the right-
hand lever towards the steering wheel for ap-
proximately 1 second or move the lever to
the left.
204

Table of Contents

Related product manuals