Data transfer
Special characteristics
During an active Android Auto™ connection,
the following characteristics are applicable:
●
An active Android Auto™ device can be
connected at the same time via Bluetooth®
(HFP profile) with the infotainment system.
●
It is possible to use the phone’s functions
through Android Auto™. If the Android Au-
to™ device is connected at the same time via
Bluetooth® with the infotainment system,
the telephone function of the infotainment
can also be used.
●
An active Android Auto™ device cannot be
used as a multimedia device in the Media
main menu.
●
It is not possible to use the built-in naviga-
tion system and the Android Auto™ naviga-
tion system at the same time. The last route
started interrupts the one that was previously
active.
●
On the instrument panel screen you can
view data from the Telephone mode.
●
The instrument panel screen does not dis-
play any indication to turn or the Media
mode.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
voice control
●
Press
briefly to start voice control using
the infotainment system.
●
Press this button for a long time to start
voice control on the connected smart-
phone.
Note
●
The availability of technologies depends
on the country and may vary.
●
You will find information about technical
requirements, compatible mobile phone
devices, certified applications and their
availability on the SEAT (www.seat.com)
and Android Auto™ websites, at specialised
CUPRA dealerships or at any SEAT dealer-
ship.
MirrorLink®
Requirements for MirrorLink®
In order to use MirrorLink™, the following re-
quirements must be met:
●
The mobile device must be compatible
with MirrorLink™.
●
The mobile phone device must be con-
nected to the infotainment system via a USB
connection that is suitable for data transmis-
sion.
●
The USB cable used must be an original
cable provided by the mobile phone device
manufacturer.
●
Depending on the mobile tphone device
used, a Car-Mode application that is suitable
for using MirrorLink® must be installed.
Establish connection
When you first connect a mobile phone de-
vice, follow the instructions on the infotain-
ment system screen and on the mobile
phone device.
The requirements must be met to use Mir-
rorLink™.
Launch MirrorLink®:
●
Press HOME > Full Link to access the Full
Link main menu.
●
OR: press
APP
to access the Full Link main
menu.
●
Press to establish the connection with the
mobile phone device.
Disconnecting
●
In the MirrorLink® mode, press the
APP
icon to access the Full Link main menu.
●
OR: press
to access the MirrorLink®
main menu.
●
Press
to interrupt the active connection.
»
171
To Next Page
Loading...
