Infotainment operation
●
Place your mobile device in the middle of
the pad with the screen facing up
›››
Fig. 136
›››
.
Make sure there are no objects between the
pad and the mobile phone.
The mobile phone will start charging auto-
matically. For further information about
whether your mobile device supports Qi
technology, check your phone's user manual
or visit the CUPRA website.
WARNING
●
The mobile phone may heat up due to
the wireless charging. Think about this be-
fore you pick it up, and take care when re-
moving it.
●
There must be no metallic or other ob-
jects between the mobile phone and the
housing, to prevent the functionality of the
Connectivity Box from being affected.
Note
●
Your mobile device must support the Qi
inductive charging interface standard for
proper operation.
●
The charging time and the temperature
vary in accordance with the device used.
●
The maximum charging capacity is 5 W.
●
Qi technology does not allow you to
charge more than one mobile device simul-
taneously.
●
You are advised to keep the engine run-
ning to guarantee proper wireless charging.
●
When a telephone with Qi technology is
connected by USB, it will be charged by the
means specified by the manufacturer.
Multimedia
USB port
Fig. 137
Centre console: USB port.
Fig. 138
Rear part of the centre console: USB
connectors with power outlet function.
The USB port can be found in the storage
compartment area of the front centre con-
sole
›››
Fig. 137 .
Depending on the equipment and the coun-
try, the vehicle may also have USB connec-
tions exclusively for charging or as a power
socket.
These USB ports are located at the rear of
the console, between the front seats
›››
Fig. 138.
195
To Next Page
