EasyManua.ls Logo

Cupra Ateca 2020 - Temperature; Air Distribution; Defrost;Demist Function; Climatronic Controls and Functions

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Climatronic* controls and functions
Fig. 129 In the centre console: Climatronic controls.
Temperature
1
/
2
The temperature of the right and left sides
can be adjusted separately using the adjust-
ers. The selected temperature is shown on
the display of the climate control panel.
Synchronisation: press button

so that
settings on the driver's side apply to the pas-
senger side. Use the temperature regulator
for the passenger side to set a different tem-
perature.

The set air temperature is kept constant.
Temperature and the amount and distribu-
tion of air are controlled automatically. Auto-
matic mode is switched off when the fan
power is changed manually.
Cooling mode

Press the button to switch on or off the cool-
ing system.
The cooling mode cools and dehumidifies
the air.
Blower
Adjust the fan power.
Air distribution
/
/
The airflow adjusts automatically for com-
fort. It can also be manually distributed to
the desired zone by pressing the corre-
sponding button:
The airflow is directed towards the chest
The airflow is directed towards the foot-
well.
The airflow is directed at the wind-
screen.
Maximum cooling power

The recirculation of air and the cooling sys-
tem turn on automatically and air distribu-
tion adjusts automatically to the position
.
Defrost/demist function

The Climatronic’s defrost function removes
ice and fog from the windscreen. The air is
dehumidified and the fan is set high.
Infotainment System

Open the air conditioning settings in the in-
fotainment system
page 147 .
The climate control operation and settings
menu will be displayed in the infotainment
system screen.
146

Table of Contents

Related product manuals