Infotainment system
Special characteristics
During an active Apple CarPlay™ connec-
tion, the following characteristics are appli-
cable:
●
Bluetooth® connections between the
iPhone™ and the infotainment system are
not possible.
●
If there is an active Bluetooth® connec-
tion, it is automatically interrupted.
●
The phone functions are only available
through Apple CarPlay™. The functions de-
scribed for the Infotainment system are not
available.
●
The connected iPhone™ cannot be used
as a multimedia device in the Media main
menu.
●
It is not possible to use the built-in naviga-
tion system and the Apple CarPlay™ naviga-
tion system at the same time. The last route
started interrupts the one that was previously
active.
●
Depending on the infotainment system
you use, on the instrument panel screen you
can view data from the Telephone mode.
●
The instrument panel screen does not dis-
play any indication to turn.
●
With the multifunction steering wheel you
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
voice control
●
Press
briefly to start voice control using
the infotainment system.
●
Press this button for a long time to start
voice control (Siri™) of the connected
iPhone™.
Note
●
The availability of technologies depends
on the country and may vary.
●
You will find information about technical
requirements, compatible iPhones, certi-
fied applications and their availability on
the SEAT (www.seat.com) and Apple Car-
Play ™ websites, at specialised CUPRA deal-
erships or at any SEAT dealership.
Android Auto™
Requirements for Android Auto™
In order to use Android Auto™, the following
requirements must be met:
●
The mobile phone device, called smart-
phone from here on, has to be compatible
with Android Auto™.
●
The smartphone must have an Android
Auto™ application installed.
●
The smartphone has to be connected
through the USB connection with data trans-
mission with the infotainment system.
●
The USB cable used must be an original
cable provided by the smartphone manufac-
turer.
Android Auto™ Wireless: Bluetooth® and
Wi-Fi also have to be activated on the de-
vice.
Establish connection
When you first connect a smartphone, follow
the instructions on the infotainment system
screen and on the smartphone.
The requirements must be met to use An-
droid Auto™.
Launch Android Auto™:
●
Press HOME > Full Link to access the Full
Link main menu
●
OR: press
APP
to access the Full Link main
menu.
●
Press Android Auto™ to establish a con-
nection with the smartphone.
Disconnecting
●
On the Android Auto™ mode, press the
Return to SEAT icon to access the Full Link
main menu.
●
Press
to interrupt the active connection.
170
To Next Page
Loading...
