Instruments and warning/control lamps
Identifying letters on engine (LDM)
Select the menu
Engine code
. The identify-
ing letters of the engine will be shown on the
instrument cluster display at the bottom left.
Setting the clock
Select the
Time
menu and set the correct
time by turning the right thumbwheel of the
multifunction steering wheel.
Driving data indicator (multifunction
display)
The display of the travel data (multifunction
display) shows different values about the
journey and the consumption.
Change from one display to another
●
Turn the right thumbwheel of the multi-
function steering wheel
›››
page 80 .
Changing memory
While in
Travel data > General infor-
mation
press
on the multi-function
steering wheel to switch between the 3
memories
1)
:
Since start: The memory is deleted if
the journey is interrupted for more than
2 hours.
Since refuelling:
Display and stor-
age of the journey data and the con-
sumption values collected. When refu-
elling, the memory is deleted.
Long-term:
This memory contains
travel data up to a maximum of 19 hours
and 59 minutes or 99 hours and 59 mi-
nutes, or up to a maximum of 1999.9 km
or 9999.9 km. When one of these val-
ues is exceeded (varies depending on
the version of the instrument panel),
the memory is deleted.
Delete journey data presets
●
Select the memory that you wish to erase.
●
Keep the
button on the multi-function
steering wheel pressed for approximately 2
seconds.
Select the instructions
In the Infotainment system, in the menu Ve-
hicle settings, you can display different travel
data
›››
page 84 .
–
–
–
Current consumption: The current
fuel consumption display operates
throughout the journey, in litres/100
km; and with the engine running and
the vehicle stopped, in litres/hour.
Average consumption:
The average
fuel consumption is displayed after driv-
ing for approximately 300 metres.
Travelling time:
This indicates the
hours (h) and minutes (min) since the
ignition was switched on.
Range:
Approximate distance in km
that can still be travelled if the same
driving style is maintained.
Distance:
Distance covered in km (m)
after switching on the ignition.
Average speed:
The average speed
will be shown after driving for approxi-
mately 100 metres.
Digital speed:
Current speed dis-
played in digital format.
Setting a speed warning
●
Select the display
Warning at --- km/h
or
Speed warning at --- mph
.
»
–
–
–
–
–
–
–
1)
This will show all data on the display at the
same time: distance travelled, average con-
sumption, average speed and autonomy.
71
To Next Page
Loading...
