Cupra Ateca 2020 - Indications about the Technical Data

Indications about the technical data
›››
Fig. 215 Ateca 4Drive
A Front projection (mm) 868
B Rear projection (mm) 877
C Wheelbase (mm) 2,631
D Length (mm) 4,376
E Front track (mm) 1,573
F Back track (mm) 1,547
G Width (mm) 1,841
H Height at kerb weight (mm)
1,601
a)
1,615
b)
I Ground clearance between the axles (mm) 175
J Front projection angle limited by the bumper maximum 18.9°
K Rear projection angle limited by the bumper maximum 23.6°
Turning radius (m) 10.8
Values for the 245/40 R19 ET45 wheel and the 2.0 TSI 221 kw engine
a)
Distance to the roof.
b)
Dimension to the roof bars.
331