Transporting children safely
Fit a child seat with the ISOFIX / i-Size and Top Tether* system
Fig. 25 Rear seat: ISOFIX/i-Size securing rings.
Fig. 26 Rear seats: fitting a child seat with the ISO-
FIX system.
Child seats can be secured quickly, easily
and safely on the rear side seats with the
“ISOFIX” and Top Tether* system.
Two “ISOFIX” retaining rings are fitted on
each rear side seat. In some vehicles, the
rings are secured to the seat frame and, in
others, they are secured to the rear floor.
The “ISOFIX” rings are located between the
rear seat backrest and the seat cushioning
›››
Fig. 25. The Top Tether* rings are located
on the rear part of the backrests of the rear
seats (behind the seat backrest or in the
boot)
›››
page 37 .
To understand the compatibility of the “ISO-
FIX” systems in the vehicle, check the table
below.
Vehicle ISOFIX positions
Weight group Size class
a)
Electrical
equipment
Front passenger seat
Rear side seat Rear central seat
airbag enabled airbag disabled
Baby carrier
F ISO/L1 X X X X
G ISO/L2 X X X X
IUF: Suitable for forward-facing ISOFIX universal child restraint systems approved for use in this weight group.
IL: It is suitable for certain ISOFIX child restraint systems (CRS) that can be for the specific vehicle, restricted or semi-universal categories. Take the child seat manufacturer's vehicle
list into account.
X: ISOFIX position not suitable for ISOFIX child restraint systems for this weight group or size class.
»
35
To Next Page
Loading...
