EasyManua.ls Logo

Cupra Ateca 2020 - Trailer Assist

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Help with parking and manoeuvring
Whenever the obstacle is located in the ve-
hicle’s direction of travel, the corresponding
audible warning will sound.
As the vehicle approaches an obstacle, the
segments are displayed closer to the vehicle.
When the penultimate segment is displayed,
this means that the vehicle has reached the
collision zone. In the collision zone, the ob-
stacles are represented in red (including
those out of the path). Do not continue to
reverse
in Introduction on page 258,
in Introduction on page 259!
If you are equipped with the Top View
Camera*
Segments are not displayed when the vehi-
cle is equipped with Top View Camera*.
The Parking Aid system will issue an audible
warning for objects that are near the rear of
the vehicle, and the Top View Camera* im-
age will be available on the screen, giving a
real image of the objects around the car.
Trailer Assist
Introduction
Trailer assist helps the driver to reverse and
manoeuvre with a trailer.
By moving the rotary knob of the exterior
mirrors, the trailer assist directs the trailer
that is hitched. The driver has to accelerate,
change gears and brake!
System limitations
Under certain circumstances, the camera
does not detect objects such as trailer draw
bars, bars, fences, posts or thin trees, or an
open (or opening) rear lid, which could dam-
age the vehicle.
In order to guarantee good system opera-
tion, keep the camera clean, free of snow or
ice, and do not cover it with adhesives or
other objects. Do not allow the draw bar to
be covered by external influences.
Use the trailer manoeuvre assistant only
when the rear lid is closed correctly.
CAUTION
The trailer maneuver assistant does not
take the vehicle’s surrounding as a refer-
ence. No obstacle detection takes place.
The driver alone has to assess whether it is
possible to manoeuvre safely with the tow
vehicle and trailer set.
Always observe the movement of the
trailer and, if necessary, actively interrupt
the manoeuvre to avoid damage. Even if
the trailer manoeuvring assistant is operat-
ed correctly, on rare occasions the trailer
may move in a different way to the setting.
Do not rely solely on the indications on
the instrument cluster display.
Note
The trailer manoeuvre assistant automati-
cally switches off approx. 10 minutes after
being activated. The assistant is also deac-
tivated if the driver does not perform any
action over the course of approx. 3 mi-
nutes.
Requirements
The following requirements must be met for
the trailer manoeuvre assistant to work:
The engine is running.
The ESC must be connected.
The driver's door and the rear lid are
closed.
The exterior mirrors are not folded.
There is a non-articulated one or two axle
trailer hitched and electrically connected.
Both the tow vehicle and trailer are stop-
ped.
The maximum bending angle has not been
exceeded.
The length of the trailer’s drawbar has
been determined.
»
265

Table of Contents

Related product manuals