EasyManua.ls Logo

Cupra Ateca 2020 - Selecting a Parking Mode

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Help with parking and manoeuvring
Selecting a parking mode
Fig. 178
On the instrument panel display: view of
the parking assist system with reduced view.
Fig. 179
On the instrument panel display: indica-
tion of parking modes.
Parking assist has the following 3 parking
modes:
Reverse parallel parking.
Reverse angle parking.
Forward angle parking.
Selecting a parking mode after passing in
front of the space
After activating the Park Assist system and
after detecting a parking space, the display
on the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected
mode is shown on the instrument panel dis-
play
Fig. 178 . The reduced display of oth-
er possible parking modes is also shown
Fig. 179. If the mode selected by the sys-
tem does not correspond to the desired
mode, you can select another mode by
pressing the
button
Fig. 177 .
The necessary conditions to park with Park
Assist have to be met
page 253 .
Press the
button.
A control lamp on the
button lights up
when the system is switched on. Additionally,
the selected parking mode is shown on the
instrument panel display and the reduced
display shows another parking mode it can
be changed to.
Turn on the corresponding turn signal to-
wards the side of the road where you are
parking. The instrument panel displays the
side corresponding to the road. By default, if
the turn signal is not on, it parks on the right
in the direction of traffic.
If necessary, press the
button again to
change to the next parking mode.
Once you have switched to all possible
parking modes, if the
button is pressed
again, the system switches off.
Press the
button again to switch the sys-
tem back on.
Follow the instructions displayed on the in-
strument panel while paying attention to
traffic and drive the vehicle past the parking
space.
Special case of perpendicular parking
space to park forwards without driving
past first
The necessary conditions to park with Park
Assist have to be met
page 253 .
Move forward towards the parking space
while paying attention to traffic and stop the
vehicle with the front part partially inside the
parking space.
Press the
button once.
A control lamp on the
button lights up
when the system is switched on. Additionally,
the selected parking mode is shown on the
instrument panel display without reduced
display.
Release the steering wheel
in Intro-
duction on page 252.
255

Table of Contents

Related product manuals