Page 107 of 118
Cygnus DIVE Technical Specifications
Data Output and Storage RS485 2-wire duplex serial data output, 56000/115200 Baud.
32 Mbit Internal Flash Data Storage.
Data Connector Fischer 105 Series
Calibration setting storage Calibration Data stored to Internal Flash Memory
Calibration Mechanisms Not required for Multiple Echo mode.
Automatic V-path correction for twin crystal probes.
Option of two point calibration for twin crystal probes.
Display & Recall Facilities N/A
Display Response Time 125 ms / 500 ms
Printer Output N/A
Environmental Rating IP68 Rated to 300 m (984 ft) immersion in sea water
MIL STD 810G Method 501.6 (High Temp +55°C)
MIL STD 810G Method 502.6 (Low temp -20°C)
MIL STD 810G Method 507.6 (Humidity 95%)
Shock & Impact MIL STD 810G Method 514.7 (Vibration)
MIL STD 810G Method 516.7 (Shock 20g)
MIL STD 810G Method 516.7 (Transit Drop 1.22m)
Compliance RoHS Compliant.
BS EN 15317:2000
The Cygnus DIVE gauge is a European Registered Community
Design, No. 001947326-0001. See http://oami.europa.eu for more
details.
To Next Page
Loading...
Need help?
General