Page 80 of 118
17. CygLink Surface Display and Control Kit
CygLink is a Windows
®
application for PC’s that allows remote
viewing, control and data logging of the DIVE gauge. The software
can provide the following functionality:
1. Surface display of thickness measurements
2. Surface display of A-scan graph
3. Surface display of the gauge’s battery level
4. Remote setting of the velocity of sound
5. Remote setting of the units
6. Remote control of the Deep Coat function
7. Data Logging of thickness measurements into a Survey report
8. Transferring data logged measurements out of the DIVE
gauge
9. Estimation of thickness from A-scan graph and data logging
of this estimated thickness value
Part Numbers
The CygLink kit can be supplied as an additional feature with any
DIVE gauge, either from new or separately at a later date. For the
part number see Accessories on page 103.
Kit Contents
The CygLink kit comprises of the following items:
1. USB-RS485 Converter Cable
2. CygLink Software Installer on USB Flash Drive
You will also need an Umbilical cable and connectors to connect
the DIVE gauge to the top side. Cygnus can supply the complete
umbilical cable with connectors fitted, or the customer can make
their own umbilical cable using connectors supplied with cable
tails.
To Next Page
Loading...
Need help?
General