EasyManua.ls Logo

Cygnus M2-DIVE - Technical Specifications of the Cygnus DIVE Gauge; General Attributes: Size and Weight; Power Supply and Battery Specifications; Operating and Storage Temperature Ranges

Cygnus M2-DIVE
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cygnus DIVE Operating Manual M2-DIVE-M-ENG_Iss5.docx
Page 105 of 118
22. Technical Specifications
Cygnus DIVE Technical Specifications
General Attributes
Size 105 mm x 110 mm x 35 mm (W x H x D)
(4.1 in x 4.3 in x 1.4 in)
Weight In Air Complete Gauge 905 g (2 lb.)
Gauge Body 557 g (1.22 lb.)
Battery 79 g (0.17 lb.)
Probe & Cable 269 g (0.6 lb.)
Power Supply Rechargeable Lithium-Ion Battery
Probe Sockets Fischer 105 Series
Operating Temperature Range -10°C to +50°C (14°F to 122°F)
Storage Temperature Range -10°C to +60°C (14°F to 140°F)
Battery Operation Time Approximately 10 hrs. continuous measurement with fully
charged battery pack.
Battery Voltage Range Min 3.2 V dc, Max 4.5 V dc
Battery Type Sealed Lithium-Ion rechargeable single cell. 8.1 Watt-hours.
Internally protected against short circuit and overcharge.
Low Battery Indication Battery Level Indication on Display with Low Battery Warning
Message.
PRF N/A
Monitor Outputs N/A
Through Coating
Measurements
Through coating measurement in Multiple Echo mode only.
Coatings up to 3 mm thick as standard depending on coating
velocity.
Deep Coat mode provides ability to measure through thicker
coatings depending on coating material.
Materials Sound Velocity from 2000 m/s to 9000 m/s
[0.0780 in/us to 0.3543 in/us]

Table of Contents