Cygnus DIVE Operating Manual M2-DIVE-M-ENG_Iss5.docx
Page 82 of 118
Installing CygLink
CygLink V5 is supplied with the kit on a USB Flash Drive, or it can
be downloaded from the Cygnus Instruments website. If you want
to make sure you are installing the latest version then
downloading from the website is the best route.
Requirements
To install and run CygLink the computer must:
1. Be running Windows 7 or a newer version
2. Have sufficient resources for Microsoft .NET Framework
installation
3. We recommend a screen resolution of 1280 x 720 or greater
4. We recommend at least 1GB of memory
Upgrading
You can check the Cygnus Instruments website for the latest
version of CygLink V5.
If you are upgrading from a
n older version of CygLink then
you must uninstall the old version of CygLink first.
Installing
If you downloaded the CygLink installer file from the Cygnus
website then this is a single self-extracting ZIP file.
Simple double click the ‘setup’ or ‘CygLink…’ exe file to start
installation. You will need to agree to the license terms and
conditions. There are no options to select so installation is straight
forward.
will need to accept the End User Licence Agreement in order to
complete the installation and a summary of its terms is provided
at the start. We advise opting for the Typical setup option for the
smoothest installation experience.