DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
180
Figure 5-89 LLDP Global Settings Window
The fields that can be configured in LLDP Global Settings are described below:
Parameter Description
LLDP State
Select this option to enable or disable the LLDP feature
LLDP Forward State
Select this option to enable or disable LLDP forward state. When the LLDP State
is disabled and LLDP Forward Sate is enabled, the received LLDPDU packet will
be forwarded.
LLDP Trap State
Select this option to enable or disable the LLDP trap state.
LLDP-MED Trap State
Select this option to enable or disable the LLDP-MED trap state.
Click the Apply button to accept the changes made.
The fields that can be configured in LLDP-MED Settings are described below:
Parameter Description
Fast Start Repeat
Count
Enter the LLDP-MED fast start repeat count value. This value must be between 1 and
10.
Click the Apply button to accept the changes made.
The fields that can be configured in LLDP Configurations are described below:
To Next Page
Loading...
