D-Link DXS-3400 SERIES - Appendix B - System Log Entries

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
437
Appendix B - System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the System Log of the
Switch.
802.1X
Log Description Severity
Event description: 802.1X Authentication failure.
Log Message: 802.1X authentication fail [due to <reason>] from (Username: <username>,
<interface-id>, MAC: <mac-address>)
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated.
interface-id: The interface name.
macaddr: The MAC address of the authenticated device.
Warning
Event description: 802.1X Authentication successful.
Log Message: 802.1X authentication success (Username: <username>, <interface-id>,
MAC: <mac-address>)
Parameters description:
username: The user that is being authenticated.
interface-id: The interface name.
macadd r: The MAC address of the authenticated device.
Informational
AAA
Log Description Severity
Event description: AAA global state is enabled or disabled.
Log Message: AAA is <status>.
Parameters description:
status: The status indicates the AAA enabled or disabled.
Informational
Event description: Successful login.
Log Message: Successful login through <exec-type> from <client-ip> authenticated by
AAA <aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL).
client-ip: It indicates the client’s IP address if valid through IP protocol.
aaa-method: It indicates the authentication method, e.g.: none, local, server.
server-ip: It indicates the AAA server IP address if authentication method is remote server.
username: It indicates the username for authentication.
Informational
Event description: Login failed.
Log Message: Login failed through <exec-type> from <client-ip> authenticated by AAA
<aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web, Web(SSL).
client-ip: It indicates the client’s IP address if valid through IP protocol.
aaa-method: It indicates the authentication method, e.g.: none, local, server.
server-ip: It indicates the AAA server IP address if authentication method is remote server.
username: It indicates the username for authentication.
Warning