DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
357
Figure 9-83 Traffic Segmentation Settings Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the receiving Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the receiving port range used for the configuration here.
Forward Unit
Select the forward Switch unit that will be used for this configuration here.
From Forward Port ~ To
Forward Port
Select the forward port range used for the configuration here.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove an entry based on the information entered.
Storm Control
This window is used to display and configure the storm control settings.
To view the following window, click Security > Storm Control, as shown below:
Figure 9-84 Storm Control Window
The fields that can be configured in Storm Control Trap Settings are described below:
To Next Page
Loading...
