DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
24
Click the Delete button to delete the specified entry.
PTP (Precise Time Protocol)
PTP Global Settings
This window is used to display and configure the Precise Time Protocol (PTP) feature’s global settings.
To view the following window, click System > PTP (Precise Time Protocol) > PTP Global Settings, as shown below:
Figure 3-20 PTP Global Settings Window
The fields that can be configured are described below:
Parameter Description
PTP State
Select to enable or disable the PTP feature here. When the PTP function is
enabled, the Switch port will add residence time to correct the field. When the
PTP function is disabled, all Switch ports will forward the PTP packets according
to the multicast filtering configuration.
PTP Mode
Select the PTP mode here.
Click the Apply button to accept the changes made.
USB Console Settings
This window is used to display and configure the USB console settings.
To view the following window, click System > USB Console Settings, as shown below:
Figure 3-21 USB Console Settings Window
The fields that can be configured are described below:
Parameter Description
USB Console State
Select to enable or disable the USB console state here.
USB Inactivity Timeout
Enter the USB inactivity timeout value here. The range is from 1 to 240 minutes.
Select the Active option to disable the timeout feature.
Click the Apply button to accept the changes made.
To Next Page
Loading...
