DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
10
NOTE: When the state of a combo port is enabled/disabled, regardless of the Medium Type selected,
both the RJ45 and SFP ports will be enabled/disabled.
Port Status
This window is used to display the Switch’s physical port status and settings.
To view the following window, click System > Port Configuration > Port Status, as shown below:
Figure 3-5 Port Status Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the stacking unit ID of the Switch that will be displayed here.
Port GBIC
This window is used to display active GBIC information found on each applicable physical port of the Switch.
To view the following window, click System > Port Configuration > Port GBIC, as shown below:
To Next Page
Loading...
