DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
208
Figure 6-27 IPv6 General Prefix Window
The fields that can be configured are described below:
Parameter Description
Interface VLAN
Enter the VLAN interface ID used here. The range is from 1 to 4094.
Prefix Name
Enter the IPv6 general prefix entry’s name here. This name can be up to 12
characters long.
IPv6 Address
Enter the IPv6 address and prefix length here.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
RIP
RIP Settings
This window is used to display and configure the Routing Information Protocol (RIP) feature’s settings.
To view the following window, click L3 Features > RIP > RIP Settings, as shown below:
To Next Page
Loading...
