DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
25
SRM
SRM Prefer Current Settings
This window is used to display and configure the Switch Resource Management (SRM) settings. This window is used
to specify the SRM mode to be used on the Switch for optimizing resources for various functions.
To view the following window, click System > SRM > SRM Prefer Current Settings, as shown below:
Figure 3-22 SRM Prefer Current Settings Window
The fields that can be configured are described below:
Parameter Description
SRM Prefer Mode
Select the SRM prefer mode here. Options to choose from are:
• LAN - Specifies that the Switch prefers the LAN switch mode.
• IP - Specifies that the Switch prefer the IP route mode.
• L2VPN - Specifies that the Switch prefer the Layer 2 VPN mode.
Click the Apply button to accept the changes made.
SRM Prefer Mode
This window is used to display the SRM preferred mode settings. The entries in this table are fixed values indicating
the maximum number of entries allowed per feature.
To view the following window, click System > SRM > SRM Prefer Mode, as shown below:
Figure 3-23 SRM Prefer Mode Window
To Next Page
Loading...
