D-Link DXS-3400 SERIES - Authenticator Statistics

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
303
Figure 9-14 Authentication Sessions Information Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Click the Init by Port button to initiate the session information based on the port selections made.
Click the ReAuth by Port button to re-authenticate the session information based on the port selections made.
Click the Init by MAC button to initiate the session information based on the MAC address.
Click the ReAuth by Port button to re-authenticate the session information based on the MAC address.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Authenticator Statistics
This window is used to display and clear the authenticator statistics.
To view the following window, click Security > 802.1X > Authenticator Statistics, as shown below:
Figure 9-15 Authenticator Statistics Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this query here.
Port
Select the appropriate port used for the query here.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Counters button to clear the counter information based on the selections made.
Click the Clear All button to clear all the information in this table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.