D-Link DXS-3400 SERIES - Ipv6 Interface

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
196
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After selecting the DHCP Client tab, the following page will appear.
Figure 6-9 User Management Settings Window
The fields that can be configured are described below:
Parameter Description
DHCP Client Client-ID
Enter the DHCP client’s client ID here. The range is from 1 to 4094. This
parameter is used to specify the VLAN interface whose hexadecimal MAC
address will be used as the client ID sent with the discover message.
Class ID String
Enter the class ID string here. This string can be up to 32 characters long. Select
the Hex option to enter the class ID string in the hexadecimal format. This string
can be up to 64 characters long. This parameter is used to specify the vendor
class identifier used as the value of Option 60 for the DHCP discover message.
Host Name
Enter the host name here. This string can be up to 64 characters long. This
parameter is used to specify the value of the host name option to be sent with the
DHCP discover message.
Lease
Enter and optionally select the DHCP client lease time here. In the text box the
lease time, in days, can be entered. The range is from 0 to 10000 days. Hours
and Minutes can also be selected optionally.
Click the Apply button to accept the changes made.
IPv6 Interface
This window is used to display and configure the IPv6 interface’s settings.
To view the following window, click L3 Features > Interface > IPv6 Interface, as shown below:
Figure 6-10 IPv6 Interface Window
The fields that can be configured are described below: