DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
257
Parameter Description
are specified by administrator.
• Auto - Specifies that the default CND defense mode and alternate priority
are controlled automatically.
• Comp - Specifies that the default CND defense mode and alternate priority
are determined by global setting. This is the default option. Comp stands for
Component.
Admin Defense Mode
Select the admin defense mode that will be used on the specified port(s) here.
Option to choose from are Disabled, Interior, Interior-ready, and Edge.
• Disable - Specifies that the congestion notification capability is
administratively disabled for this priority. This is the default option.
• Interior - Specifies that the priority parameter of frame input is not remapped
to or from this priority and the frames are transmitted without a CN-TAG.
• Interior-ready - Specifies that the priority parameter of frame input is not
remapped to or from this priority and the CN-TAGs won’t be stripped off
when transmitting the frames.
• Edge - Specifies that the priority parameter of frame input at this priority is
remapped to an alternate value. Frames at other priorities are not remapped
to this priority and the frames are transmitted without a CN-TAG.
Alternate Priority
Select the alternate priority value that will be used on the specified port(s) here.
The range is from 0 to 7.
CNPV
Select the CNPV value that will be used in the search here. The range is from 0 to
7.
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
QCN CNPV Interface Simple
This window is used to display the simple QCN configuration and status for each CNPV.
To view the following window, click QoS > QCN > QCN CNPV Interface Simple, as shown below:
Figure 7-36 QCN CNPV Interface Simple Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch’s unit ID that will be used here.
To Next Page
Loading...
