DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
14
Figure 3-9 Jumbo Frame Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the stacking unit ID of the Switch that will be configured here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Maximum Receive Frame
Size
Enter the maximum receive frame size value here. This value must be between
64 and 12288 bytes. By default, this value is 1536 bytes.
Click the Apply button to accept the changes made.
Loopback Test
This window is used to display and configure the loopback settings of the physical port interfaces and to start testing.
To view the following window, click System > Loopback Test, as shown below:
To Next Page
Loading...
