DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
193
Figure 6-5 Gratuitous ARP Window
The fields that can be configured are described below:
Parameter Description
IP Gratuitous ARP State
Select to enable or disable the learning of gratuitous ARP packets in the ARP
cache table.
Gratuitous ARP Trap State
Select to enable or disable the gratuitous ARP feature’s trap state here.
IP Gratuitous ARP Dad-
Reply State
Select to enable or disable the IP gratuitous ARP Dad-reply state.
Gratuitous ARP Learning
State
Select to enable or disable the gratuitous ARP learning state. Normally, the
system will only learn the ARP reply packet or a normal ARP request packet that
asks for the MAC address that corresponds to the system’s IP address. This
option used to enable or disable the learning of ARP entries in the ARP cache
based on the received gratuitous ARP packet. The gratuitous ARP packet is sent
by a source IP address that is identical to the IP that the packet is queries for.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the field that can be configured for Gratuitous ARP Send Interval is described below:
Parameter Description
Interval Time
Enter the gratuitous ARP sending interval time, in seconds, here.
Click the Apply button to accept the changes made.
IPv6 Neighbor
This window is used to display and configure the IPv6 neighbor settings.
To view the following window, click L3 Features > IPv6 Neighbor, as shown below:
To Next Page
Loading...
