DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
384
Figure 10-21 Cable Diagnostics Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port ~ To Port
Select the appropriate port range used for the configuration here.
Click the Test button to test the specific port.
Click the Clear button to clear all the information for the specific port.
Click the Clear All button to clear all the information in this table.
Ethernet OAM
Ethernet OAM Settings
This window is used to display and configure the Ethernet Operations, Administration, and Maintenance (OAM)
settings.
To view the following window, click OAM > Ethernet OAM > Ethernet OAM Settings, as shown below:
To Next Page
Loading...
