DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
249
Parameter Description
• RX - Specifies to clear the counters of received PFC frames.
• TX - Specifies to clear the counters of transmitted PFC frames.
• Both - Specifies to clear the counters of received and transmitted PFC
frames.
Click the Clear button to clear the counters based on the selections made.
WRED
WRED Profile
This window is used to display and configure the Weighted Random Early Detection (WRED) feature’s profile settings.
To view the following window, click QoS > WRED > WRED Profile, as shown below:
Figure 7-26 WRED Profile Window
The fields that can be configured are described below:
Parameter Description
Profile
Enter the WRED profile’s ID here. The range is from 1 to 128.
Packet Type
Select the packet type here. Options to choose from are TCP and Non-TCP.
• TCP - Specifies the WRED drop parameters for the TCP packets to be set.
• Non-TCP - Specifies the WRED drop parameters for non-TCP packets to be
set.
Packet Colour
Select the packet color here. Options to choose from are Green, Yellow, and
Red.
• Green - Specifies the WRED drop parameters for green packets to be set.
• Yellow - Specifies the WRED drop parameters for yellow packets to be set.
To Next Page
Loading...
