D-Link DXS-3400 SERIES - Time and SNTP; Clock Settings; Time Zone Settings

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
20
Figure 3-15 System Attack Log Window
The fields that can be configured are described below:
Parameter Description
Unit
Select the stacking unit ID of the Switch that will be displayed here.
Click the Clear Attack Log button to clear the system attack log entries displayed in the table.
Time and SNTP
Clock Settings
This window is used to display and configure the time settings for the Switch.
To view the following window, click System > Time and SNTP > Clock Settings, as shown below:
Figure 3-16 Clock Settings Window
The fields that can be configured are described below:
Parameter Description
Time
Enter the current time in hours (HH), minutes (MM), and seconds (SS) here. For
example, 18:30:30.
Date
Enter the current day (DD), month (MM), and year (YY) here. For example,
30/04/2015.
Click the Apply button to accept the changes made.
Time Zone Settings
This window is used to display and configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click System > Time and SNTP > Time Zone Settings, as shown below: