D-Link DXS-3400 SERIES - TACACS+ Server Settings; TACACS+ Group Server Settings

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
317
Parameter Description
IPv4 TACACS+ Source
Interface Name
Enter the name of the IPv4 TACACS+ source interface here.
Click the Apply button to accept the changes made.
The fields that can be configured in TACACS+ Global IPv6 Source Interface are described below:
Parameter Description
IPv6 TACACS+ Source
Interface Name
Enter the name of the IPv6 TACACS+ source interface here.
Click the Apply button to accept the changes made.
TACACS+ Server Settings
This window is used to display and configure the TACACS+ server settings.
To view the following window, click Security > TACACS+ > TACACS+ Server Settings, as shown below:
Figure 9-35 TACACS+ Server Settings Window
The fields that can be configured are described below:
Parameter Description
IP Address
Enter the TACACS+ server’s IPv4 address here.
IPv6 Address
Enter the TACACS+ server’s IPv6 address here.
Port
Enter the port number used here. This value must be between 1 and 65535. By
default, this value is 49.
Timeout
Enter the timeout value here. This value must be between 1 and 255 seconds. By
default, this value is 5 seconds.
Key Type
Select the key type that will be used here. Options to choose from are Plain Text
and Encrypted.
Key
Enter the key, used to communicate with the TACACS+ server, here. This key
can be up to 254 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
TACACS+ Group Server Settings
This window is used to display and configure the TACACS+ group server settings.