DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
172
Parameter Description
From Port ~ To Port
Select the appropriate port range used for the configuration here. This is available
when Port is selected in the Find Type drop-down list.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Multicast VLAN
Multicast VLAN Settings
This window is used to display and configure the multicast VLAN settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > Multicast VLAN
Settings, as shown below:
Figure 5-82 Multicast VLAN Settings Window
The fields that can be configured in Multicast VLAN Global Settings are described below:
Parameter Description
Multicast VLAN IPv4 State
Select to enable or disable the IPv4 IGMP control packet process in multicast
VLANs.
Forward Unmatched
Select the enable or disable the forward unmatched feature here. This specifies
that if the received IGMP or MLD control packet is untagged, does not match any
profile, and the associated default VLAN is a multicast VLAN, or is tagged with a
To Next Page
Loading...
