D-Link DXS-3400 SERIES - 6 Layer 3 Features; Arp; ARP Aging Time; Static ARP

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
190
6. Layer 3 Features
ARP
Gratuitous ARP
IPv6 Neighbor
Interface
UDP Helper
IPv4 Static/Default Route
IPv4 Static Route BFD
IPv4 Route Table
IPv6 Static/Default Route
IPv6 Route Table
Route Preference
IPv6 General Prefix
RIP
RIPng
IP Multicast Routing Protocol
BFD
IP Route Filter
Policy Route
VRRP Settings
VRRPv3 Settings
ARP
ARP Aging Time
This window is used to display and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
Figure 6-1 ARP Aging Time Window
The fields that can be configured are described below:
Parameter Description
Timeout
After click the Edit button, enter the ARP aging timeout value here.
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Static ARP
This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below: